A two-part, 100% solids, Zero VOC, below grade, all-purpose epoxy coating with a maximum service temperature of 165°F (74°C). Formulated to be backfilled in 4-5 hours at 70°F and 50% relative humidity. It is easy to apply with a long open pot life compared with other epoxies.
Overview
A two-part, 100% solids, Zero VOC, below grade, all-purpose epoxy coating with a maximum service temperature of 165°F (74°C). Formulated to be backfilled in 4-5 hours at 70°F and 50% relative humidity. It is easy to apply with a long open pot life compared with other epoxies. TC 7025 meets NACE RP0105 and ANSI/AWWA C210.
A two-part, 100% solids, Zero VOC, below grade, all-purpose epoxy coating with a maximum service temperature of 165°F (74°C). Formulated to be backfilled in 4-5 hours at 70°F and 50% relative humidity. It is easy to apply with a long open pot life compared with other epoxies.
Overview
A two-part, 100% solids, Zero VOC, below grade, all-purpose epoxy coating with a maximum service temperature of 165°F (74°C). Formulated to be backfilled in 4-5 hours at 70°F and 50% relative humidity. It is easy to apply with a long open pot life compared with other epoxies. TC 7025 meets NACE RP0105 and ANSI/AWWA C210.
Downloads
Tapecoat-Tc7025
pdfDownload
Related products
A two component, 100% solids, high-temperature epoxy with a maximum service temperature of 300°F (149°C). It can be used as a standalone pipeline coating or as a primer for Tapecoat High-Temperature Tapes.
A two-part, 100% solids, Zero VOC, below grade, fast curing epoxy with a maximum service temperature is 300°F (149°C), and can be backfilled in 2-3 hours at 70°F and 50% relative humidity.
A a two-part, 100% solids, moisture tolerant, Zero VOC epoxy that can be applied to dry and damp surfaces. It has a maximum service temperature of 165°F (74C°).
A low viscosity, transparent, two-part epoxy system designed to be used as a room temperature curing adhesive and encapsulant for small to medium sized electronic packages.
This two-part, green epoxy adhesive cures at room temperature for non-sag structural bonding. It offers low shrinkage, strong shock resistance, reliable mechanical and electrical properties, and performs well on damp surfaces.
