HumiSeal Thinners are specifically formulated to be used in conjunction with different coating chemistries. Thinner 905 is compatible with HumiSeal 1B51NS, 1B51NSLU, and RoHS directive 2015/863/EU
Overview
HumiSeal Thinners are specifically formulated to be used in conjunction with different coating chemistries. Thinner 905 is compatible with HumiSeal 1B51NS, 1B51NSLU, and RoHS directive 2015/863/EU. HumiSeal® Thinners are flammable and the following standard safety precautions should be observed: Use only in well-ventilated areas. Protective gloves and goggles should be worn. In case of prolonged skin contact, wash with water. In case of eye contact, flush with water and contact physician. Avoid prolonged breathing of vapors. Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters. Consult the Material Safety Data Sheet (MSDS/SDS) for more specific product information.
HumiSeal Thinners are specifically formulated to be used in conjunction with different coating chemistries. Thinner 905 is compatible with HumiSeal 1B51NS, 1B51NSLU, and RoHS directive 2015/863/EU
Overview
HumiSeal Thinners are specifically formulated to be used in conjunction with different coating chemistries. Thinner 905 is compatible with HumiSeal 1B51NS, 1B51NSLU, and RoHS directive 2015/863/EU. HumiSeal® Thinners are flammable and the following standard safety precautions should be observed: Use only in well-ventilated areas. Protective gloves and goggles should be worn. In case of prolonged skin contact, wash with water. In case of eye contact, flush with water and contact physician. Avoid prolonged breathing of vapors. Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters. Consult the Material Safety Data Sheet (MSDS/SDS) for more specific product information.
Specifications
| Color | Clear |
|---|---|
| Packaging | CASE |
| Volatile Organic Compounds | 770 g/l |
| Compatible HumiSeal® Coatings | 1B51NS, 1B51NSLU |
| Quantity per Package | 4 5L Cans |
| Flash Point, Closed Cap Method | 21° F (-6° C) |
| Shelf Life, Date Of Manufacture | 24 Months |
Related products
When necessary, the viscosity of the following HumiSeal® coatings: 1A20, 1A27, 1A33, 1B31, 1B66, 1B73 and 1R33 may be adjusted for application purposes, using this compatible thinner.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
HumiSeal® 1B15 is a single component, fast drying, easily repaired, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B15 coating is RoHS Directive 2002/95/EC compliant.
HumiSeal® Stripper 1091 dissolves cured HumiSeal® silicone coatings without negatively affecting printed wiring board substrates.
HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type.
